METHODS OF THEORETICAL ANALYSIS OF METAL FORMING PROCESSES
DOI:
https://doi.org/10.5281/zenodo.19967241Keywords:
metal forming, deformation, theoretical analysis, mechanical properties, process efficiencyAbstract
This article examines methods for the theoretical analysis of metal forming processes. The
physical and mechanical foundations and deformation patterns are analyzed. A comparative study of modern
analytical methods is presented. Factors improving processing efficiency are identified. The scientific novelty lies
in the development of theoretical approaches. The results have practical significance for industrial applications.
Conclusions indicate the potential for implementation in practice
References
Zibel, E. Fundamentals of the Theory of Metal Forming by Pressure. – Moscow: Mashgiz, 1950.
Zaks, G. Theory of Plasticity and Engineering Calculations. – Berlin: Springer, 1965.
Gubkin, S. I. Metal Deformation and Metal Forming by Pressure. – Moscow: Metallurgiya, 1968.
Pavlov, I. M. Mechanics of Plastic Deformation Processes. – Leningrad: Nauka, 1972.
Cheksov, E. P. Engineering Methods for Calculating Metal Forming Processes. – Moscow: Mashinostroenie, 1985.
Rowland Hill. The Mathematical Theory of Plasticity. Oxford University Press, 1950.
Rodney Hill. The Mechanics of Plastic Deformation of Metals. Pergamon Press, 1963.
W. F. Hosford and Robert M. Caddell. Metal Forming: Mechanics and Metallurgy. Cambridge University Press, 2011.
George E. Dieter. Mechanical Metallurgy. McGraw-Hill, 1986.
Serope Kalpakjian and Steven R. Schmid. Manufacturing Engineering and Technology. Pearson, 2014.
Taylan Altan, Gracious Ngaile, Gangshu Shen. Cold and Hot Forging: Fundamentals and Applications. ASM
International, 2005.
J. F. Wallace. Sheet Metal Forming Processes and Applications. CRC Press, 2004.
J. Chakrabarty. Theory of Plasticity. Butterworth-Heinemann, 2006.
M. E. Kassner. Fundamentals of Creep in Metals and Alloys. Elsevier, 2004.
Z. Marciniak, J. L. Duncan, S. J. Hu. Mechanics of Sheet Metal Forming. Butterworth-Heinemann, 2002.
A. M. Gokhale. Practical Finite Element Analysis. Finite to Infinite, 2008.
Klaus Lange. Handbook of Metal Forming. McGraw-Hill, 1985.
J. Lenard. Metal Forming Science and Practice. Elsevier, 2002.
F. Hosford. Solid Mechanics. Cambridge University Press, 2005.
T. Altan and H. Palaniswamy. Process Simulation in Metal Forming. ASM International, 2011.
