ON THE ISSUE OF RESEARCH AND DEVELOPMENT OF A SLAG-FORMING BASE FOR ELECTRODE COATINGS FOR WEAR-RESISTANT SURFACING

ON THE ISSUE OF RESEARCH AND DEVELOPMENT OF A SLAG-FORMING BASE FOR ELECTRODE COATINGS FOR WEAR-RESISTANT SURFACING

Authors

  • Sadikov Jaxongir Nasidjanovich

DOI:

https://doi.org/10.5281/zenodo.18063218

Keywords:

Manual arc surfacing, electrode, ferroalloys, marble, pegmatite, ternary phase diagram, slag, viscosity, density, separability of the slag crust.

Abstract

This article describes the development of a slag-forming base for electrode coatings for wear-resistant surfacing
in the CaO–SiO₂–Al₂O₃ system, as well as the study of the influence of Na₂O and K₂O contents in this slag system on slag
density, viscosity, hiding power, and the separability of the slag crust

Author Biography

Sadikov Jaxongir Nasidjanovich

Tashkent State Technical University
“Technological Machines and Equipment” Docent (PhD)

References

Verkhoturov, A. D. Methodology for Creating Welding Materials: Monograph. — Khabarovsk: DVGUPS Publishing

House, 2009. — 128 p.

Dunyashin, N. S. Development of Multicomponent Coatings of Electrodes for Manual Arc Welding of Low-Carbon and

Low-Alloy Steels. — Tashkent: Fan va texnologiya, 2019. — 160 p.

Kornienko, E. E., Ignatov, M. N., Ignatova, A. M., Naumov, S. V., Chumachenko, A. Yu. Investigation of the temperature

dependence of the coefficients of thermal expansion of weld metal and welding slag in the range of 100–1000 °C //

Metal Processing. — 2012. — No. 3 (56). — Pp. 116–119.

Moraveckii, S. I. Separation of the slag crust during arc welding (Review). Part 1. Mechanism of chemical adhesion of

the slag crust with the weld metal // Automatic Welding. — 2011. — No. 1. — Pp. 32–37.

Moravetsky, S. I. Separation of the slag crust during arc welding (Review). Part 2. Nature of the influence of the main

factors on slag crust separability // Automatic Welding. — 2011. — No. 2. — Pp. 22–27.

Dunyashin, N. S., Galperin, L. V., Ermatov, Z. D. On the development of a physical simulation of cast weld metal

chemical composition formation during manual arc welding based on the classification of electrode coating mixture

components // European Sciences Review. — 2019. — No. 1–2 (January–February). — Pp. 56–58.

Kayfas, J. Technical Note: Corrosion Product Removal from Steel Fracture Surfaces for Metallographic Examination //

Corrosion. — 1980. — Vol. 36, No. 8. — P. 443.

Downloads

Published

2025-12-01

How to Cite

Sadikov, J. (2025). ON THE ISSUE OF RESEARCH AND DEVELOPMENT OF A SLAG-FORMING BASE FOR ELECTRODE COATINGS FOR WEAR-RESISTANT SURFACING. Innovation Science and Technology, 1(12). https://doi.org/10.5281/zenodo.18063218
Loading...